Search results for "Izod impact strength test"
showing 10 items of 24 documents
Processing and Properties of Biopolymer/Polyhydroxyalkanoates Blends
2011
In this paper, the processability and the performance of a biodegradable polymer, Mater-Bi, and of its blends with either a sample of poly (hydroxy alkanoates) (PHA) or with bacterial biomass containing PHAs were compared. Adding PHA or directly the biomass containing it allows improving the processability of the matrix. Moreover, the mechanical behaviour of the systems was compared considering two different preparation methods, namely compression and injection moulding. The injection moulded samples show poorer mechanical performances than those of the compression moulded systems. The impact strength significantly improves when PHA is added while it reduces when bacterial biomass is used i…
Processing and mechanical properties of organic filer-polypropylene composites
2005
The addition of organic fillers into thermoplastic polymers is an interesting issue, which has had growing consideration and experimentation during the last years. It can give rise to several advantages. First, the cost of these fillers is usually very low. Also, the organic fillers are biodegradable (thus contributing to an improved environmental impact), and finally, some mechanical and thermomechanical properties can be enhanced. In this study, the effect of the addition of different organic fillers on the mechanical properties and processability of an extrusion-grade polypropylene were investigated. The organic fillers came from natural sources (wood, kenaf, and sago) and were compared …
Effect of fillers on the properties of recycled polymers
2003
The main problems in post-consumer plastics recycling are due to the degradation undergone during lifetime and during processing steps. Moreover, for heterogeneous recycling, the incompatibility among the different polymeric phases give rise to secondary materials with low mechanical and thermomechanical properties. The properties-reprocessing relationships are an important tool for determining not only the properties of the recycled polymers but also the strategies to apply (processing conditions, stabilisers, fillers, compatibilizers, etc) in order to obtain recycled polymers with good mechanical properties. In this work the effect of adding inert fillers and modifier agents to recycled p…
Effects of powder concentration and type of resin on the performance of marble composite structures
2009
In this work, we will expose the behaviour of a composite structure reinforced with marble powder. The attention was focused on the effects produced on the physical and mechanical properties due to different kinds of matrix (epoxy and polyester resins) and filler amounts (60%, 70%, 80%). Rheological, static flexural and Izod impact tests have been carried out. An experiment designed was defined for the mechanical tests, in order to quantify the effects of both the resin and the marble percentage on the material properties, as well as to identify a possible correlation between these factors. Moreover, water absorption and stain resistance have been evaluated to study the surface properties o…
Green composites of organic materials and recycled post-consumer polyethylene
2004
International audience; Addition of organic fillers to post‐consumer recycled plastics can give rise to several advantages. First of all, the cost of these fillers is usually very low, the organic fillers are biodegradable contributing to an improved environmental impact and, last but not least, some mechanical and thermomechanical properties can be enhanced. Organic fillers are not widely used in the plastic industry although their use is increasing. Bad dispersion into the polymer matrix at high‐level content and poor adhesion with the matrix are the more important obstacles to this approach. In this work various organic fillers have been used with a post‐consumer plastic material origina…
Low-velocity impact behaviour of green epoxy biocomposite laminates reinforced by sisal fibers
2020
Abstract Due to its good mechanical characteristics, low cost and high availability in the current market, sisal fiber is one of the most used for the manufacturing of biocomposites in various industrial fields (automotive, marine, civil construction etc.). The particular sub-fibrillar structure of the sisal fiber (similar to aramid fibers) and the corresponding anisotropic behavior detected by recent research activities, suggest that such biocomposites should exhibit also high impact strength, in such a way to permit their advantageously use also for the manufacturing of crashworthy components (bumpers, helmets, protection systems etc.), that are at the same time also eco-friendly, lightwe…
Recycled Polycarbonate Based Nanocomposites
2013
Post-consumer polycarbonate (RPC) blends with various amounts (5, 10, 30 wt. %) of ethylene vinyl acetate copolymer (EVAc) are investigated as potential nanocomposite matrices. At EVAc weight content of 10 wt.% maximum tensile strength σM and impact strength AI increase is observed in comparison to neat RPC. Addition of EVAc, however, reduces resistance to creep as well as decrease thermal stability of the investigated compositions. Addition of montmorillonite nanoclay (MMT), however, allows increase modulus of elasticity E and yield strength σY of the investigated RPC blend with 10 wt. % of EVAc. Besides it creep resistance and thermal resistance of the investigated system is increased to …
Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends
2007
Abstract One of the main shortcomings of the mechanical recycling is that the properties of the secondary materials are generally sensibly inferior with respect to the virgin ones. This feature implies, for sure, that they cannot be used for the same technological application but also other uses of the secondary material are impossible. The aim of this work is to study the re-building of recycled post-consumer pipes, made of a blend of different polyethylenes, by re-processing in the presence of a nitroxyl compound as radical generator. The processing temperature and the additive concentration have been varied in order to study the effect of these parameters on the final properties. The mec…
Recycled Polycarbonate Blend as Matrix for Development of Polymer Nanocomposite
2012
Summary: Secondary polycarbonate (SPC) is modified with various amounts (5, 10, 30 wt%) of ethylene vinyl acetate copolymer (EVAc) in order to reduce its brittleness. It is observed that at optimal EVAc weight content maximum tensile strength σM and impact strength AI increse by 14% (ωEVAc = 5 wt%) and 450% (ωEVAc = 10 wt%) in comparison to neat SPC, respectively. Addition of montmorillonite nanoclay (MMT) allowed further increase of elastic modulus E, strength and creep resistance of the investigated SPC blend with 10 wt% of EVAc.
Processing and mechanical properties of recycled PVC and of homopolymer blends with virgin PVC
1996
Mechanical and processing properties of recycled polyvinylchloride (PVC, from bottles and pipes) were compared with those of virgin pipe grade PVC. Blends of recycled and pipe grade PVC were also prepared and characterized. It was found that the particle size and the restabilization of the recycled PVC are the two main points to be considered for obtaining virgin/recycled PVC blends with uniform and good mechanical properties. In general, recycled PVC not only does not significantly reduce the modulus and tensile strength, but also improves the impact strength and processing behavior of pipe grade virgin PVC. Only the thermomechanical resistance is slightly lowered. The latter points hold, …